Audion Silver Night 300B Anniversary Mono Block amplifiers

EXCLUSIVELY IMPORTED BY TRUE AUDIOPHILE

Clean, very clean 18 Watts that can power 88dB speakers without giving up the magic of Audion circuits... Mini Review by True Audiophile

"Musically the Silver Night Anniversary amps are a joy and will be certain to put a smile on the faces of anyone who sits down and spends some time with them. The level of detail they bring in the higher frequencies is pretty stunning, but never feels overly done or tiring. They control bass wonderfully with no hint of overhang or flabbiness. And that mid-band is a thing to behold...Play anything from hard rock, to banging techno, to light folk and you will be justly rewarded, with amps that are just doing their thing in the background, play something you know well and with a mid-rich mix and you will be in Seventh-Heaven." HiFi Pig 2019

This is Audion's intermediate level, zero feedback, power amplifier, using parallel 300B tubes. Hand built and point to point hard wired using solid silver 5 *9’s in some of the audio path. The amp is auto biased. It will take almost any 300B (Unit is supplied with JJ tubes) delivers a conservative 18 CLEAN watts into 8 ohms.  Therefore, it has the power of competitors boasting 34-36W.

The Audion Silver Night 300B Paralleled Single Ended is a triode based mono-block amp that uses no (zero) feedback in the design. Auto biased.

Wherever possible the components are sourced from Europe and the USA avoiding inferior Chinese components.

The Audion Silver Night Parallel single ended amplifier comes with JJ 300B’s, but can also be made with PX25 or 2A3 tubes upon request. This amp is best suited for use with loudspeakers of 88db or better efficiency. Ideally matched with our range of Electron cables. The amps deliver 18 watts into 8 ohms from a 300B. Upgrade options are available for this model, see upgrade options at end. 

The chassis is black powder coated aluminum as is the transformer cover. The top plate and badge are mirror finished stainless steel. 

A front volume control and mono inputs on the rear means that a pre-amplifier is not necessary with this unit, but is advised . It will take almost any 300B (Unit is supplied with JJ 300B tubes). Amp has mono inputs and both 4 and 8 ohm outputs. The Audion Paralleled Single Ended is not too analytical, but very clean and musical and very transparent.

Optional Upgrades:

Tubes: PX25 tubes in place of 300B

Excalibur Level 

V-Caps

Tantulum resistors

Silver input

Volume Alps HQ

Speaker Terminals

RCA Jacks - Heavy Silver

Components of the Audion components:

• Transformers and chokes are design and handmade by Audion: Mains, chokes and output transformers.
• Superior quality parts sourced from Europe or the US. Even the capacitors are made to Audion’s exacting specifications.
• Chassis’ are finished in-house which includes powder coating and electroplating to ensure quality.
• Special voicing of Audion amplifiers requires every part be meticulously designed to meet their standards.
• Every component is hand built usually point to point. Once burned in they listen again in case they are not satisfied before releasing each unit.

[[[proreview_start]]]

"Musically the Silver Night Anniversary amps are a joy and will be certain to put a smile on the faces of anyone who sits down and spends some time with them. The level of detail they bring in the higher frequencies is pretty stunning, but never feels overly done or tiring. They control bass wonderfully with no hint of overhang or flabbiness. And that mid-band is a thing to behold...Play anything from hard rock, to banging techno, to light folk and you will be justly rewarded, with amps that are just doing their thing in the background, play something you know well and with a mid-rich mix and you will be in Seventh-Heaven." HiFi Pig 2019

Read Full Review HERE

[[[proreview_end]]]

LINK to all the Audion Products

[[[specification_start]]]

Warranty: 2 years. Tubes 6 months. 

Audion Silver Night Specifications:

Power: 16 Watts Class A into 8 Ohms at 120V AC 
Load: 4 – 8 Ohm Nominal
Distortion @ 1Watt: <0.1% No Feedback
Frequency Response: 40KHz±3 db
Sensitivity: Variable >150mV Full output 
Noise: < (CCIR) – 90 db
Consumption: 167 Watts per Mono-block 
Tubes: 2 x 300B, 1 x 6H1N, 1 x CVX120 each mono-block
Size - 16.5in deep, 9in wide and 7.4in tall - Less tubes Weight 31 lbs - per mono block
Fuses - Power 4A / 120V

[[[specification_end]]]