Atlas Grun Ultra RCA Interconnect. New Reference.

Now at True Audiophile cable products

We literally spent 3 months testing this cable line both in-house and with clients. The initial claims made us suspicious. After all the feedback we gave in. These are remarkable cables, especially at their price. Feel confident that your hard earned audio dollars were well spent -- True Audiophile 

We carry the complete line of Atlas Cables. If you don't see it on our site, it's only because our webmaster is lazy (Hear that Ken!!!) :-) 

Atlas Grun Ultra RCA Interconnects. Available in Speaker, Power and other digital types

The Mavros Ultra RCA has been designed from the ground up to complement the performance of ‘high-end’ audio systems by achieving maximum signal transfer with minimum susceptibility to spurious interference.

. 

The Mavros Ultra L RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique. Cables manufactured with lower grade materials and poor manufacture typically have a coarse, grainy structure which compromises sound quality. In the manufacture of Mavros, we maximise the copper’s conductivity by ensuring that there is typically one grain in approximately 125 metres of conductor, allowing the signal a continuous unbroken path –in practice, the signal has a faster, cleaner and more direct path to follow.

The cable consists of a pair of conductors, each made up from six bundles of 12 multi-conductor wires, plus a thicker centre wire. This in turn is covered by a continuous copper/Mylar™ electrostatic screen with copper shielding braid, ensuring minimal susceptibility to RF interference and noise.

Theoretically, the best dielectric (insulation layer) is air. Conventional dielectric (insulation) materials impose their own signature distortion and loss on the signal. Our technique uses a microporous PTFE (Teflon™) tape, which is wound around the core conductors, then covered again and stabilised using a protective FPE (Flexible PolyEthylene) dielectric. This process maintains the required conductor geometry, and bestows greater manufacturing consistency. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra L RCA or XLR connectors, both of which have minimal effect on the integrity of the signal.