Furutech-TP86 Superior Power Filtering Distribution

Current stock: 0

Furutech. TP86G 4-Outlet Power Distributor with FPX- G AC Outlets

Now at True Audiophile.

We're always looking for power center/conditioners that really work and work for high current applications such as amplifiers. While many companies claim you can use their power conditioners for high current ie amplifiers, we found this to not be true. It always darkens the sounds and muddies the sound stage. After looking for years to find a more affordable solution than the HB Cable and GigaWatt conditioners, we an even better option than the one we used to carry and they performed brilliantly.-- TA mini review

This is a NEW Item. The only real difference between the TP86 and TP66 is that the TP86 has 2 additional outlets this a larger chassis.

2-Pole + Earth • Rating: 15A 125V AC Furutech’s Award-Winning Pure Transmission Build Quality Total Attention to Detail and Build Quality Many A/V enthusiasts go to great lengths to carefully set up major system components, but pay little attention to the source, the AC power.

Furutech knows that each and every part of the chain is as important as the next, so maximum attention is lavished by Furutech on all aspects of AC power transfer. The specially crafted high grade aluminum chassis effectively shields against another common problem, RFI (Radio Frequency Interference).

Internal wiring is Furutech •-14, 2.0 sq. mm (14 AWG) guaranteeing low electrical resistance. Furutech FPX(G) 20A high performance gold-plated receptacles are wired to a high performance FI-06(G) IEC. The receptacles feature non-magnetic gold-plated phosphor bronze conductors for stable, long lasting, optimized power transfer. The e-TP 86 will allow the delicacy, refinement and nuance of a performance through, along with micro- and macro-dynamics that will leave you breathlessly engaged.

Displays of all types will exhibit greater, sharper resolution with less ghosting, color shift, “snow”, or vertical and horizontal lines.


• Beautifully-crafted special design and high grade aluminum chassis effectively shields against RFI (Radio Frequency Interference)

• Internal wiring: Furutech

•14 conductor at 2.0 sq. mm (14 AWG): Guarantees low electrical resistance

• Pure Transmission FPX(G) 20A high performance gold-plated receptacles o Wired to high performance FI-06(G) IEC inlet o Special damping material set under duplex receptacle o Non-magnetic gold-plated phosphor bronze, conductors for stable, long lasting, optimized power transfer ALL metallic parts used in Furutech products go through the Alpha Process treatment to keep all connectors, conductors, and metal parts in a perfect stress-free, stable and highly conductive state.

How can you tell you’re a victim of polluted AC power? Listen and look for these symptoms: 

Flat, hard, and grainy high frequencies, a thick and bloated midrange, fat, uncontrolled bass, and loss of air and soundstage stability. 

On video displays the picture resolution is less than sharp, with “ghosting”, color shift, “snow”, or vertical and horizontal lines. 

If this looks and sounds familiar, you need Furutech Filtering Distribution Center


The e-TP86 is a sophisticated, luxuriously made power distributor that eliminates many common problems found with audio and video components caused by massively contaminated electrical power. 

The AC waveform becomes severely distorted by ground noise, voltage spikes and sags,high frequency power supply noise from other components in your own system, plus radiated high frequency digital noise from processors and digital interconnects. 

There are also distortion products at the top and bottom of the AC waveform created by switch-mode power supplies in electronic devices on the same circuit. Additionally, you’re never alone; your residential AC mains supply is shared with other apartments, homes, and businesses on the same utility transformer. That’s why many audio and video enthusiasts notice their systems are more enjoyable late at night or on weekends!

The beautifully crafted special grade aluminum chassis effectively shields against another common problem, 

RFI (Radio Frequency Interference), and a layer of Formula GC-303 blocks EMI (Electro Magnetic Interference). 

Internal wiring is FURUTECH μ-14 wire14 AWG that guarantees low resistance. 

Furutech Hyper Quality High Performance Receptacles are wired to the IEC AC input of the e-TP60. 

Receptacles feature 24k gold-plated phosphor bronze, non-magnetic conductors for stable, long lasting, optimized power transfer. 

Furutech’s Two-Stage Cryogenic and Demagnetization Alpha Process

The Final Result

The 2-Step Cryogenic and Demagnetizing Alpha Process works in tandem with other design-in features to create the most optimized AC power transfer possible. 

Furutech’s total awareness and devotion to detail results in a greater sense of power, dynamics, and resolution, with cleaner, blacker backgrounds and a larger, more stable soundstage, vivid tonal colors and deeper extension at both ends of the frequency range. 


 We carry the entire Furutech line. Just enquire for pricing.



Product Specifications:

Electrical Specifications:


125V AC 50/60Hz CURREN




WEIGHT (Net.): 1 Kg



Furutech. e-TP86 Power Filtering Distribution. True Audiophile

There are no product reviews

Condition: New
Width: 30.00
Height: 10.00
Depth: 18.00
Shipping: Calculated at Checkout